Grease filters

EN 779:2012
Operating temperature: max 200°C
The final pressure loss: 100 - 200 Pa


The aluminium mesh is inserted to the aluminium profile in several layers.

Input and output side of the filter is protected by aluminium expanded metal. At higher depths of the filter, the carrier core is inserted into the center of the filter.

The dimensions and depth of the filter specifies the customer. The depth of the filter is produced in the range from 8 mm to 150 mm.

For perfect function, it is necessary to keep the grease filters clean. When the filters are clogged, they need to be washed in hot water with the contents of active detergents or a solution of bicarbonate of soda.

If there is irreversible damage to the filters, we liquidate the filters in the collection of metal waste.


We produce the grease filters in the aluminium design and they are intended mainly for the detection of fatty particles in the food industry. However, the filters installed in industrial plants--steel mills, welding metal plants, in areas with excessive amounts of oil aerosol. The filters also capture a stream of sparks when grinding and cutting of metal materials.

Filtration classes

  • G2
  • G3


Sizes in mm m3/h Pa m2
287x592x22 1225 26 0,17
400x400x22 1150 26 0,16
400x500x22 1440 26 0,20
400x625x22 1800 26 0,25
500x500x22 1800 26 0,25
500x625x22 2250 26 0,32
592x592x22 2525 26 0,35
287x592x48 1225 32 0,17
400x400x48 1150 32 0,16
400x500x48 1440 32 0,20
400x625x48 1800 32 0,25
500x500x48 1800 32 0,25
500x625x48 2250 32 0,32
592x592x48 2525 32 0,35
Are you interested? Create a request Pera | EKOFILTR, spol. s r.o.
Have you a question? Contact us Mobil | EKOFILTR, spol. s r.o.