EN
CZ
NJ
Pocket filter F7
(sooner EN 779)
Parameters
Pockets are sewn on the sewing automated central KSL, which is guaranteed taper of all pockets. Pockets are set for the plastic frames made of ABS. Further, the insertion can be into ZN metal frames, which are used in installations with increased temperature.
Class F7 filters can be supplied with welded pockets to the new automated welding line the pockets of ultrasound.
The filters in plastic design meet high hygiene standards, and when putting in the pharmaceutical, food industry and opto electronic component manufacturing.
Outside the normal dimensions produce pocket filters and atypical dimensions.
The filters are liquid in incinerators or landfills managed.
Use
Pocket filters of filter class F7 is used as a 2. stage of filtration, with effect from 1 micron.
Technical data
- Filtration class EN 779: F7
- EN ISO 16890: ePM2.5 65 %
- Initial pressure loss: 107 Pa
- Recommended final pressure loss: 400 Pa
- Thermal resistance: max 80°C, 100°C
- Nominal air flow rate: 3400 m3/h
Sizes
| Dimensions in mm (F7) | Air Load (m3/h) | Number of pockets | The depth of the pockets (mm)) | Initial pressure loss (Pa) | ISO ePM2.5 (%) |
|---|---|---|---|---|---|
| 592x592 | 3400 | 8/10 | 600 - 630 | 107 | 65 |
| 490x592 | 2800 | 6/8 | 600 - 630 | 107 | 65 |
| 402x592 | 2280 | 5/6 | 600 - 630 | 107 | 65 |
| 287x592 | 1680 | 4 | 600 - 630 | 107 | 65 |
| 287x287 | 900 | 4 | 600 - 630 | 107 | 65 |
